ds0058 issue 4 page 1 of 2 monitran ltd monitor house hazlemere rd penn bucks uk hp10 8ad tel: +44 (0) 1494 816569 fax: +44 (0) 1494 812256 email: info@monitran.co.uk www.monit ran.co.uk monitran reserves the right to alter the specification without prior notice mtn/vm110 hand held vibration meter multiple measurements lcd display ac or dc outputs carrying case battery powered peak 2000m 10 range 2000 mm/sec 200 mm/sec 20 mm/sec 200m 20m 200g 20g 2g l.p. filter (khz) vibration meter 5 20 r.m.s vm 110 monitran ltd. off standard vibration meter, probe & accessories the mtn/vm 110 vibration meter is a battery powered, portable instrument designed to operate with a constant current type accelerometer (10mv/g sensitivity) to make vibration measurements simple and convenient. both rms and peak detection of acceleration, velocity a nd displacement can be made in three ranges. a switched low pass filter for the reduction of wide band noise is provided. an ac output via a ?d? type output socket allows the connection of additional filters or a signal analyser. a dc output is also p rovided to drive a chart recorder. standard package order code part no. description mtn/vm110 mtn/2100 mtn/mm001 mtn/ps001 vibration meter hand held probe magnetic base adapter hand held spike adapter other accessories available
ds0058 issue 4 page 2 of 2 technical specification measurement ranges acceleration: 2g, 20g, 200g velocity: 20mm/sec, 200mm/sec, 2000mm/sec displacement: 20m, 200m, 2000m frequency range upper frequency, selectable low pass filters of 5khz, 10khz, 20khz lower frequency fixed, ac c. 5hz, vel. 10hz, dis. 15hz detector switch selectable: rms or peak display 12.7mm, 3? digit lcd. 3 readings per second accuracy (10 mv/g input) figures are for the vm110 only, since input transducers will affect the overall system accuracy. all rea dings are 1 digit added to the following full - scale errors. acc. 1.5% rms; 3% peak: vel 2.5% rms; 4% peak: dis 3.5% rms; 5% peak (9% at 10khz) equivalent input noise the equivalent input noise is the lowest measurable signal level in the range due to internally generated electrical noise. rms noise peak noise acc: 2g range; 2mg 6mg 20g range; 2mg 6mg 200g range; 20mg 60mg vel: 0.1mm/sec 0.3mm/sec dis: 0.2m 0.6m inputs various accelerometers can be used in conjunction with the vm110. for more details contact the sales office. outputs ac: 200mvac, full range as selected. dc: 200mvdc, full range as selected. power 2 x pp3 9v batteries. battery low warning indicator on display. battery life is approximately 15 hours dependent on battery type.
|
